Apply adhesive
Apply a sufficient layer of adhesive on the wall with roller ( Cellulose methyl ether or wheat paste are recommended )
Cut off a strip
Measure the height of the wall and Cut the fabric in lengths allowing for 5-10 cm in excess of the height of the wall. For pattern matching allow extra fabric. Unroll the fabric and place the inner side of the roll onto the wall.
Apply the strip
The fabric has trimmed edges, which allows hanging edge to edge.
Smooth it
Press well onto the surface with a plastic spatula or a steel putty knife with rounded corners.
Trimming
Trim neatly at the ceiling and floor using bladed knife and straight edge.
Painting
Start to paint the wall when the fabric has dried. Use an angled brush or a small radiator roller along ceiling, floor etc. Then apply the paint with a roller. Two coats of paint are normally enough.
